1358 Hooper Ave,

Toms River, NJ 08753

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

Mon-Sat 7:00am-7:00pm

Sunday 10:00am-6:00pm

1358 Hooper Ave,

Toms River, NJ 08753

Commercial Pipe Lining & Bursting Service

Local Plumber-Commercial Pipe Lining & Bursting

Our Services

Premium Quality Commercial Plumbing Professional Service is Our Guarantee

Trusted & Experienced Solutions to look after your Business problems promptly and thoroughly so it doesn’t affect your business.

Pipe Lining System Capabilities:

  • Drainage and sewer pipelines of all types (suching as galvanized steel, cast/black iron, copper, and lead pipelines).

  • Insertion of part or entire sections.

  • Site repair work of joints and other structural defects.

  • Fix all typical pipe products.

  • Sizes from 3 ″ to 10 ″.

  • Flexes up to 90 degrees.

  • Blind ends.

  • Lengths up to 300 FT.

Retails Stores and Chains

Shopping Centers / Malls

Realty Management

Office Buildings

Hospitality / Hotels

Industrial / Factories

Schools / Colleges


Hospitals / Assisted Living


Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Ocean County, New Jersey


What Is Pipe Lining?

Pipe-lining is a no-dig option for replacing or fixing damaged, broken, leaking, or blocked pipes. Above all, it is essential to handle this, particularly with your business sewage system lines.


Because it is a “no-dig” approach, costly excavation and demolition are no longer required. As a result, pipe-lining is less costly than conventional re-piping techniques such as excavations or open trench techniques.


Think of a smooth new PVC pipeline put within the original broken pipeline to best describe pipe-lining. The space between the new and old pipes is closed with an epoxy waterproof seal. As a result, in spite of the decrease of inner size, tests can show an improvement in original flow capacity.

How do I recognize I need pipelining?

The damages are most likely already underway if you own or operate a commercial property that is more than ten years old.


You will most likely see or experience the following pipeline rust symptoms:


  • Water with discolouration
  • Stains on sinks
  • Smells or leakages
  • Poor water flow
  • Constant sewage backups

What kinds of pipes can be lined?

Lining can be done on commercial sewage system drain pipes from the commercial property to the mainline. Roofing system drain pipes, collectors, and business floor drain pipes can likewise be dealt with lining.

What are the advantages of pipe-lining?

Don’t dig … restore! Excavations can be exceptionally costly in terms of work force, time, products, permit charges, and damage expenses.


Pipe-lining does not interfere with a business day-to-day activities. It will not lose any income because of loud digging devices or even the need to segment off risky working sections. Plus, drain activities will just be stopped for a short time period during the job.

Is sewer pipeline lining good?

Lining sewage system pipes can save up to 75% of the cost of replacing an old pipeline with a new one for commercial facilities.


The labor cost reduces because fewer hours are required to carry out the trench-less treatment. It is just the best value among all repair alternatives readily available.

Just how much does it cost to reline a pipe?

The cost of relining a damaged sewage system pipeline ranges from $80-250 per foot, with an average cost of approximately $160 per foot. Whereas, repair costs for ordinary sewer pipes might range from $4,000 to $20,000, depending on the circumstance.

What causes pipeline issues?

Tree Root Infiltration: Tree roots can typically pierce and get in drain systems via connections, cracks, and pipes. As a result, blockages and water loss will begin to occur.


Water: Over time, water can degrade, rust, damage, and develop pinhole leakages in the system. Similarly, “hard water” having minerals can trigger pipes to get encrusted and clogged, leading to blockages.


Moreover, pipe wall surfaces will collect water and “soft water” that may consist of acidic minerals, can easily dissolve and thin out the pipeline walls.


Plumbing Materials: Without a doubt, metal piping systems made from copper or other galvanized metals present significant problems gradually. Problems might occur in as little as 6 years.


A lot of copper and galvanized pipes on average will start to rust after 10 years. So, pipe-lining is the best long-term treatment to pipeline corrosion.

What are the signs of a broken sewer pipeline?

Here are the 10 most typical signs of a broken sewage system pipeline:


  • Sewage Backups and Obstructions
  • Drain Gas Smell
  • Mold Issue
  • Slow Drain
  • Additional Green and Lush Patches in Grass
  • Imprint In Lawn or Under Pavers
  • Foundation Cracks, Settlement, and Sinkholes
  • Bug Invasion
  • Rodent Problems
  • Pooling Septic Waste

Is a sewage leakage harmful?

The most common  hazard caused by a sewage leakage are gases. Sewage can produce a wide range of gases, consisting of co2, methane, chlorine, nitrous oxide, hydrogen sulfide, and sulfur dioxide.


In high dosages, hydrogen sulfide is harmful and can trigger queasiness, confusion, and even death.


If you believe or not sure that you could have a problem, call a professional plumber immediately.

the best solutions

Residential & Commercial Plumbing

24/7 Emergency Service

The Pipe Lining Process

Local Plumber-Commercial Pipe Lining Diagram

PREPARATION: To achieve the best results, the present pipeline should be well prepared. This includes examining the pipeline with a premium video camera, cleaning the pipe, and finally determining its size and length.


Massive repair work might need the disruption of water flow|streams through existing pipes in order to prepare the pipeline for lining.


SETUP (INVERSION): Setting up a pipe liner includes placing the liner through drain clean-outs or minor openings. When it comes to partly broken drain sections, we simply restore the broken part of the pipeline’s opening.


The products utilized for the liner are selected based on the condition of the pipeline. Whereas, straight pipes use standard liner tubes, while pipes with severe bends, angles, and transitions need more versatile tubes.

USING THE EPOXY: The epoxy is what holds the liner to the pipeline wall. This bond forms a very tight fit, avoiding water from getting in or exiting the pipeline. After relining the pipeline using a pipe liner system, any internal corrosion or disintegration stops at once. A lined pipeline can no longer be permeated by roots.  Once a pipe is lined, it will be without root invasions for the rest of its life.


TREATING PROCEDURE: The epoxy and liner treatment in 4 to 12 hours. After the pipes have been recovered, service is restored.

What Is Pipe Bursting?

Pipeline bursting is a procedure for replacing underground pipelines such as a drain or pipes without making use of digging equipment or open trench techniques. Except for new building and construction, a lot of original U.S. sewer drain pipes and water lines have reached completion of their effective life and must be upgraded or rebuilt. For decades, streets, pathways, landscaping, and even buildings have been built on top of these enduring underground pipelines. The disruption brought on by open trench building and construction can be considerable.


Layers of cement, asphalt, and landscaping must be excavated and taken out in order to expose the pipeline and finally replace it.

Local Plumber-Commercial Pipe Bursting Diagram

The pipeline bursting method uses a cone-shaped bursting head that is slightly bigger at its base than the size of the existing broken pipeline.


The bursting head is then connected to the replacement pipeline and fed into the shattered pipeline through an entryway hole.


The broken pipeline will start to disintegrate as the replacement pipeline goes through the existing pipeline, thanks to the conical bursting head.


The pipeline bursting expert will then utilize a pull rod or hydraulic force to shatter the existing pipeline and pull it out of its present area.


It quickly fills the bursting head’s hollow since the new pipeline is linked to the bursting head. You now have a new pipeline!

What are some advantages of pipeline bursting?

Pipeline bursting is the only trenchless approach of replacement that allows the original pipeline to be refitted. It might likewise help you save cash in the long run!

However, there are several other reasons to think about pipeline bursting:


  • Minimal landscape damage– Because it only requires two openings, you will not have to stress over your lawn being turned up by excavation machinery.
  • Minimal downtime– There is no need to close or restrict sections, leading to little downtime! It only takes a couple of hours to finish the procedure.
  • lower labor costs– Pipeline bursting requires fewer hours and less labor to finish.
  • Less disturbance There is no need for enormous, loud equipment to do the task!
  • Pipeline toughness You can replace the present pipeline with a more robust pipeline to avoid having to repeat the procedure in a couple of months or years.
  • {Increased pipeline stream You might notice an increase in your wastewater flow if you utilize the trench-less sewage system method.

Is pipeline bursting safe?

Pipeline bursting is presently one of the best and most economical plumbing repair techniques readily available.

What kind of pipeline is utilized for pipeline bursting?

The most typically utilized replacement pipes for pipeline bursting applications have been high- and medium-density polyethylene (HDPE and MDPE).


The essential advantages of PE pipeline are its durability, resilience, sturdiness, toughness, longevity, flexibility, and its versatility.

How long has pipeline bursting been around?

Pipeline bursting was invented in the late 1970s in the UK by D. J. Ryan & Sons in cooperation with British Gas for replacing small-diameter, 3- and 4-inch cast iron gas mains.


This approach was patented in the UK in 1981 and later by the United States in 1986; both patents ended in April 2005.

Is pipeline bursting really good?

When compared to regular sewage system repair, pipeline bursting is one of the cleanest sewage system alternatives readily available. Because it removes the need to dig up any road or landscaping, Pipeline bursting has the least impact on the surrounding environment.


This likewise stops potentially lethal toxins from entering your system.

Some jobs are better left to the pros...

Get No-Commitment Estimates For Your Project in Ocean County, New Jersey

Proud to Install, Repair, and Service the Following Brands: